3つの異なるバージョンが利用可能
ゲストがさまざまな方法で勉強できるように、ゲストのニーズを満たすために3つの異なるバージョンを用意しました。一番目のバージョンは7004.1 Avaya Communication Server 1000 for Avaya Aura® Maintenance Examテスト問題集で、このバージョンは読書に便利で、ダウンロードして紙に印刷することができます。これはユーザーが好みの方法を選択するためには非常に柔軟です。7004.1問題集参考書の二番目のバージョンはソフトウエアで、本当テストの環境を模擬するから、本当のテストを受ける前に7004.1 Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam試験問題集を体験して緊張を大いに解消できます。コンピュータで7004.1最新問題集を練習し、本当のテストの流れを予めに体験するのは有効です。三番目のものはオンラインバージョンで、オンラインバージョンはあらゆる種類のデジタルエンドをサポートしており、オンラインとオフラインの両方で使用できるので、7004.1オンライン練習問題の学習手配は柔軟性があります。
最高のサービス
我々のカスタマーサービスは1日中いつでもオンラインでご利用いただけますので、7004.1問題集参考書に関する質問があれば、いつでも弊社の係員に連絡して問い合わせます。弊社の係員は7004.1 Avaya Communication Server 1000 for Avaya Aura® Maintenance Examテスト問題集の問題を処理するだけでなく、お客様と交流する方法を知っています。コンサルタントの助けを借りて安心してください。また、我々は7004.1テスト質問の研究に取り組んでいる専業チームがあり、もし新しい情報や動向があれば、7004.1 Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam問題集参考書をあなたに自動的に送ります。
特恵活動の行い
一般的に言えば、我々は不定期にいくつかのディスカウントを行いますので、我々の製品7004.1テスト質問に注意を払って、あなたは少ないコストでより良いチャンスをキャッチすることができます。次に、あなたは我々の製品7004.1 Avaya Communication Server 1000 for Avaya Aura® Maintenance Examテスト問題集を購入して弊社の常連客になると、一年の7004.1実際テスト質問の関連問題集を無料に楽しみます。そして、一年前に購入記録がある場合に、次回の試験準備のために7004.1 Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam問題集参考書を購入したいなら、50%割引を与えます。ご覧のように、我々の7004.1最新問題集資料は確かにあなたのお金を節約し、様々な方法で消費者としてのあなたの権利を保障します。
我々の製品7004.1 Avaya Communication Server 1000 for Avaya Aura® Maintenance Examテスト問題集について、あなたがいくつかのポイントを予め知っておく必要があります。これは三つと結論づけることができます。最初のものは安く、2番目のものは便利で、3番目は快適です。 私たちの7004.1問題集参考資料では、あなたはより簡単で楽しい方法で素晴らしいものを確実に実現しようとしています。
Avaya 7004.1 試験シラバストピック:
| セクション | 目標 |
|---|---|
| トピック 1: メンテナンスとトラブルシューティング | - 障害診断と復旧
|
| トピック 2: システムアップグレードと高可用性 | - アップグレードと復旧機能
|
| トピック 3: システム管理と設定 | - 設定管理
|
| トピック 4: ネットワーキングとルーティング | - ネットワーク設定
|
| トピック 5: Communication Server 1000 のアーキテクチャとメンテナンス | - Communication Server 1000 プラットフォームアーキテクチャ
|
Avaya Communication Server 1000 for Avaya Aura® Maintenance 認定 7004.1 試験問題:
1. Click the Exhibit button.
Consider the customer's dialing plan shown in the exhibit.
Which number used for the NARS AC1 access code?
A) 8
B) 6
C) 9
D) 31
2. The Satellite Link Control feature ensures that the configuration of a call does not include more than one communications satellite trunk. Tandem trunk calls, when connected through more than one communication satellite trunk, are subject to transmission distortion due to propagation.
Which parameters are required to be equipped or configured for Satellite Link Control in the Communication Server 1000?
A) Network Transfer (NXFR) package must be equipped.
Route must be configured with ESN2 or ESN3 signaling
Route must be designated as a satellite route.
B) Network Signaling (NSIG) package must be equipped.
Route must be configured with ESN3 signaling.
Route must be designated as a satellite route.
C) Route must be configured with STD or ETN signaling.
Route must be designated as a satellite route.
D) Network Signaling (NSIG) package must be equipped.
Route must be configured with ESN3 or ESN5 signaling.
Route must be programmed with a Traveling Class of Service (TCOS)
3. When attempting to program Zone Based Dialing through Element Manager, the user is unable to access the Dialing Configuration Page.
What needs to be configured before the Dialing Configuration Page can be accessed, assuming the ZBN_PACKAGE (420) is already installed?
A) The ZBN_PACKAGE (420) needs to be disabled.
B) Nothing, Zone Based Dialing cannot be configured in Element Manger.
C) The CDP dialing plan needs to be programmed.
D) Number Zones need to be configured
4. You are using Element Manager to program a Route List Index (RLI).
Which Electronic Switched Network (ESN) parameters must you define to be able to successfully program an RLI?
A) Minimum number of route lists (MNRL)
B) Routing Control (PTCL)
C) Optimal Route (OPRT)
D) Maximum number of route lists (MXRL)
5. Click the Exhibit button.
A customer wants to allow a station user to save an incoming number (Off-Net, Local Number) to their Personal Directory and afterwards use it to place an outgoing call without having to perform an manual manipulation to the number.
Consider the customer dialing plan shown in the exhibit.
Communication Server 1000 is configured for DAPC = YES in the Route Data Block.
With reference to the DAPC Table options in the exhibit, which Dial Access Prefix on CLID (DAPC) table should be used?
A) Table 3
B) Table 4
C) Table 2
D) Table 1
質問と回答:
| 質問 # 1 正解: A | 質問 # 2 正解: B | 質問 # 3 正解: D | 質問 # 4 正解: D | 質問 # 5 正解: A |




Date
鬼束**
Sasaki
长谷**
